The advantages of short stress mill are:

(1) of rolling mill of high rigidity to ensure the products of high precision, easy to implement the negative deviation rolling.

(2) can realize symmetrical adjustment. It for stable operation, improve operation efficiency, save the time of maintenance and replacement of guide bar and reduce operation accidents, avoid rolling workpiece bend, impact and roll accidents, improve life guide is of great significance.

(3) due to the mill to change the force transfer way, will be pressure under concentrated load change of the screw is distributed in both sides of the bearing load, the bearing and the bearing force is better, and increase bearing life than ordinary mill. More than 5 times, reducing the cost of the product.

(4) short stress mill roll system in pre-installed during roll change and adjust, parking can be about 10 min after changing the new roll system. The new mill roll system tuned or two root steel after can guarantee the products are qualified. Therefore, this mill preset performance is good, roll change fast, high yield.

Short stress also known as no arch mill, rolling mill is a kind of high rigidity rolling mill, when used in a steel mill, it should not only have high radial stiffness, but also has high axial rigidity. The current domestic have developed various types of short stress line mill, such as: GY type, HB type, type the CW, SY, GW, DW type, etc., among them there are three kinds of representative.

Short stress also known as no arch mill, rolling mill is a kind of high rigidity rolling mill, when used in a steel mill, it should not only have high radial stiffness, but also has high axial rigidity. The current domestic have developed various types of short stress line mill, such as: GY type, HB type, type the CW, SY, GW, DW type, etc., among them there are three representative, they are short stress line mill, GY type HB type arch mill, type of SY high rigidity rolling mill. This mill is refer to the Swedish a 60 P. No memorial arch type mill, combined with developed by their own different situation, so they are the main force of chief stress line structure is similar, only in the way of supporting and on some specific structure is different, each have its characteristics.