There are four problems after installation of 1000 tons cold shear:

　　1.1000 tons of cold shearing roll is far from the cutting edge. The effect of pressing steel is not good when shearing. The steel after shearing has forehead bending to reduce the grade of steel.

　　2. The upper cutting edge of the original cold shear is V-shaped cutting edge. When shearing large-sized materials, the vibration of the shear body is larger, which is harmful to the service life of the shear body.

　　3.1000 tons cold shear lubrication system has defects.

　　4. The main drive of cold shear is belt drive, which is easy to break and injure people. Through the transformation of 1000 tons of cold shear, the failure time of cold shear is greatly reduced, the operation rate of cold shear is improved, and a strong favorable guarantee for the production sequence of rolling steel is provided.

　　The 1000 ton cold shear is a set of mechanical, electrical and hydraulic integrated equipment designed and manufactured jointly with foreign parties on the basis of absorbing the technical characteristics of international advanced shear. The shearing machine is suitable for shearing small bar, flat steel and other rolling materials. It runs smoothly, reliably, and has flat cross section. Its technical specifications and performance are not lower than those of imported similar products. It has a very high cost performance ratio. At the same time, Party B can provide high quality spare parts in time to ensure stable and reliable operation of Party A's equipment.

　　Adhering to the business philosophy of "sincerely strive for perfection, trust and cultivate morality", the company wholeheartedly welcomes new and old friends from all walks of life to cooperate and guide, and win-win harmony!