Cold shearing equipment is the equipment that shears and cuts the length of the rolled piece from the cold bed.

　　The cold shearing equipment is driven by the top motor through the elastic coupling by the first gear reducer, the big gear sleeved on the crankshaft and the right half clutch fixed on the gear to rotate idly.

　　When the shearing machine starts to work, the roller of the brake device is sucked by the electromagnet. At this time, the left half of the clutch mounted on the crankshaft with the sliding key is pushed to the right by the spring and combined with the right half of the clutch, thus driving the crankshaft to rotate, and the scissors mounted on the right end of the crankshaft can get up and down linear motion. The upper cutting edge fixed on the scissors moves in a straight line with the scissors. The lower cutting edge is fixed on the frame and does not move. When the upper cutting edge falls down, the cutting of steel is realized. When the shearing is finished, the controller automatically operates to cut off the electromagnet, the roller of the brake device is pulled up and moved under the action of the spring to release the clutch, the crankshaft stops rotating, and the shears are restored to the original highest position under the action of the balance spring. The cold shearing equipment thus realizes the task of shearing the fixed length and the cutting head by circulating and reciprocating.

　　The cold shearing equipment manufactured by our company has absorbed the advanced technology of similar equipment in Germany, and localized many key technologies to make it more suitable for the current domestic metallurgical situation of a new type of finishing shearing equipment. Its performance and shear quality have reached the advanced aquatic products of the same kind in foreign countries through the use of users, and have received extensive praise from users.