Brief introduction of brake clutch-Company news-News-Maanshan to a mechanical and electrical co., LTD-Maanshan Zhicheng electromechanical Co., Ltd

Hello, welcome to visit anhui Maanshan Zhicheng Machine &Electric Co.,Ltd! ​

SetHome | AddFavorite | Contact us
logo
national hotline0555-3151761

Maanshan Zhicheng Machine & Electric Co.,Ltd.

Contact: jian-hua Yang

Tel:13705554456

Address: Maanshan horry huashan district town village in yellow

Newspresent position:​​​​Homepage > News>Company news

Brief introduction of brake clutch

Time:2019-03-30     Time to browse

  Clutch:

  The clutch in the brake clutch is located in the flywheel housing between the engine and the gearbox. The clutch assembly is fixed on the rear plane of the flywheel by screw. The output shaft of the clutch is the input shaft of the gearbox. In the course of driving, the driver can step on or loosen the clutch pedal according to the need, so that the engine and the transmission can be separated temporarily and gradually joined, in order to cut off or transfer the power input from the engine to the transmission. Clutch is a common component in mechanical transmission, which can separate or engage the transmission system at any time. Its basic requirements are: smooth joint, rapid and thorough separation; easy adjustment and repair; small external size; small quality; good wear resistance and enough heat dissipation capacity; easy operation and labor-saving, commonly divided into two categories: dental inlay type and friction type.

  Brake:

  The brake in the brake clutch is a device with the functions of decelerating, stopping or maintaining the stop state of the moving parts (or moving machinery). It is a mechanical part that stops or decelerates moving parts in machinery. Commonly known as brakes, brakes. The brake is mainly composed of frame, brake parts and control devices. Some brakes are also equipped with automatic adjusting devices for brake clearance. In order to reduce the braking moment and structure size, the brake transmitter is usually installed on the high-speed axle of the equipment, but the large-scale equipment (such as mine hoist, elevator, etc.) with higher safety requirements should be installed on the low-speed axle near the working part of the equipment.

  Maanshan Zhicheng Mechanical and Electrical Co., Ltd. has many patents. The main metallurgical products are cold shear, cold flying shear, cold bed, rolling mill series, finishing series, bar profile water cooling equipment, air cooling equipment, converter system equipment, automatic temperature and oxygen measuring device, various rollers, brake clutch.